All Things CommScope

Copper solutions warranty — acceptance criteria

• Register for the System Warranty with CommScope within 90 days of install completion. Required
• Warranty registration shows accurate end user, project, and bill of materials information. Required
• Continuity (wiremap) check completed for all installed links. Required
• Electrical performance field testing. Optional

If field testing is performed and/or required by the end user, the following are required:

• All links show pass results — no failures accepted. Required
• Correct test limit selected for the installed category and governing standard (ISO/IEC 11801-1, TIA 568.2-D, or EN 50173-1). Required
• Only a CommScope-approved field tester within valid calibration date is used. Required
• Field test results provided in the tester's native format. Required

Source: CommScope Global Enterprise Warranty — Copper Solutions Acceptance Checklist (Rev 003/2020).

Approved field test equipment (SYSTIMAX)

Common copper certifiers approved for permanent link and channel measurements:

Model	Notes
Fluke DSX-5000	Approved through Cat 6A / Class FA
Fluke DSX-8000	Approved through Cat 6A / Class FA
Fluke DSX-600 / DSX-602	Approved through Class EA
Ideal LanTek III / IV	Approved (III through FA)
VIAVI Certifier40G / 10G	Approved
Softing WireXpert 4500 / 500	Approved
AEM TestPro CV100	Approved through Class EA

Fiber testers (CertiFiber Pro, MultiFiber Pro, EXFO MAXTester, VIAVI SmartClass, etc.) are also approved — see the full PDF. Fluke DTX family products are no longer approved. Equipment must be within valid calibration. See the full list below for exact category coverage and revision history (Rev 2.0, June 2021).